Double-wall FRP tank Resin 2948APT/948-2A
● Properties:
2948APT/948-2A is a Terephthalic-DCPD unsaturated polyester resin,It has excellent chemical resistance, good glass fiber wetting.
● Features:
Has excellent mechanical of FRP.
Has good operational performance.
Has outstanding corrosion resistance(solvent resistance,acidproof,salt-tolerant,etc).
Comply with the requirements of the UL1746 certificate.
● Application:
Suitable for hand lay-up , spraying and filament winding process.Used for S/F and F/F FRP petroleum storage tank and common FRP product.
● Performance index of liquid resin:
Performance | Parameter | Unit | Standard test |
Acid value | 17-23 | mgKOH/g | GB/T 2895-2008 |
Viscosity25℃ | 0.25-0.45 | Pa.s | GB/T 7193-2008 |
Solid content | 68-75 | % | GB/T 7193-2008 |
Gel time | 10-32 | min | GB/T 7193-2008 |
● Resin Casting Properties of resin:
Executive Standard: GB/T8237-2005
Performance | Parameter | Unit | Standard test |
Barcol Hardness | 40 | GB/T 3854-2005 | |
Heat Distortion Temperature | 85 | ℃ | GB/T 1634-2004 |
Elongation At Break | 2 | % | GB/T 2567-2008 |
Tensile Strength | 50 | Mpa | GB/T 2567-2008 |
Tensile Modulus Of Elasticity | 3100 | Mpa | GB/T 2567-2008 |
Flexural Strength | 90 | MPa | GB/T 2567-2008 |
Flexural Modulus | 3200 | MPa | GB/T 2567-2008 |
● Resin FRP Properties of unsaturated polyester resin:
Performance | Parameter | Unit |
Barcol Hardness | 65 | |
Elongation At Break | 1.9 | % |
Tensile Strength | 330 | Mpa |
Tensile Modulus | 15000 | Mpa |
Flexural Strength | 330 | MPa |
Flexural Modulus | 16000 | MPa |
● UL1316/1746 Evaluation List:
Performance | Result |
Thermal aging | Excellent |
Solvent Resistance | Eligible |
Light Exposure And Water Exposure | Excellent |
Lower Temperature Impact | Eligible |
Corrosion Resistance Assessment | Eligible |
Osmotic/Dissolve Precipitation | Eligible |
Conclusions | Conform to UL1746.Recommend apply to S/F double-wall storage tanks. |
● Instruction:
1.Adjust accordingly to the changing seasons.The company reserves the right to modify certain parameters as technology advances and user requirements change.User personality requirements, please confirm with the company.
2.In the production process of using resin products, because the performance realization of user products is affected by multiple factors such as design, process and environment, it is necessary to conduct experiments, tests, and verification by yourselves before selecting and using resin products.
3.Unsaturated polyester resin products belong to class 3 of inflammable and dangerous goods, storage, transportation should comply with the relevant provisions of the state, and prohibit insolation in the sun, avoid rain.
4.Unsaturated polyester resin product waste according to GB18597-2001 standard storage, waste disposal according to GB18484-2001 standard incineration disposal, its packaging container must be in accordance with local environmental protection laws and regulations.
5.Unsaturated polyester resin is unstable, should be stored under 25 ℃ in a cool, ventilated, avoid fire, away from heat and radiation sources, keep container closed, waterproof sunscreen, should be separated from oxidant, acid, alkali.Should comply with the above packaging, transportation, storage requirements under the premise of storage period is 6 months (including the resin of the accelerator storage period for 3 months), such as storage temperature is higher (no more than 30 ℃), the storage period shall not exceed 3 months (including the resin of the accelerator storage period shall not exceed 1.5 months).
● Product Cases: