Home > Knowledge > Content

How to clean epoxy resin mixing container

May 16, 2020

1. When scrubbing the mixing container, wear gloves and wipe off excess resin on the sides and bottom of the mixing container with a paper towel. When the amount of resin in the mixing container is not large, pour a little alcohol or acetone on the paper towel to easily wipe off the surface of the container Of resin. Pay attention to put dirty paper towels in the trash can to avoid secondary pollution!

How to clean epoxy resin mixing container

2. Soak in acetone or alcohol and clean it with solvent.

3. The surface of parchment paper, wax paper, silicone pad, etc. has poor adhesion to epoxy resin. Invert the mixing container with excess resin on the surface of parchment paper, wax paper, silicone pad, etc., so that the excess resin flows out. After the liquid solidifies, the resin It is easy to peel off from the container wall, just remove the cured resin from the plastic mixing container.

Note: The mixed epoxy A / B glue should not be poured into the sink and drain pipe to prevent curing in the sink or drain pipe and block the drain pipe.


Souece:http://www.up-resin.com/

Back