Home > Knowledge > Content

Resin process types and pollution prevention

May 30, 2020

Resin usually refers to the range of softening or melting after being heated. When softened, it has a tendency to flow under the action of external forces. At room temperature, it is solid, semi-solid, and sometimes it can be a liquid organic polymer.


Pollution prevention:


(1) Do a good job in monitoring the chemical oxygen consumption CODMn in the incoming water from the two sources of oil refining.


(2) Strengthen the coagulation and clarification of the clarification tank to improve the efficiency of removing suspended organic matter and gum organic matter in the raw water. The chemical oxygen consumption CODMn of the first-level desalination feed water is controlled at <1 mg / l.


(3) It may be considered to install an organic matter remover filled with waste strong base anion resin before the negative bunk bed.


(4) Resuscitation treatment of anion exchange resin every 6-12 months to avoid further treatment when resin organic contamination is serious.


Process type:


Resin: Resin environmental protection rhinestones The main product series are: resin environmental protection rhinestones, resin, resin hotfix rhinestones, resin environmental protection hotfix rhinestones, Austrian cut diamonds, Middle Eastern cut diamonds, imitation Austrian diamonds, shaped diamonds, smooth diamonds, water drops, hearts Shape, horse eye, heart diamond, round and so on various resin hot diamond.


Various hot-melt resin drills and imitation Austrian cut face drills, Middle Eastern cut face drills, produced with imported technology, complete range, first-class quality. It can produce various shapes such as cut resin drill, smooth resin and special-shaped resin drill; the product has the advantages of high precision, good brightness, clear edges and corners, not easy to wear and scratch, rich colors, diverse shape effects, environmental protection and natural advantages.

Source´╝Ühttp://www.up-resin.com/

Back