Putty resin notes:
1. It is strictly prohibited to add "tianna water" and other solvents to reduce the viscosity of the coating, otherwise it will cause the coating blister, depression, cracking and other phenomena, but you can use tianna water to clean the tool.If you need to reduce the viscosity of the putty, you need to buy a set of putty resin from the manufacturer to adjust.
2. Cover immediately after use, and the used putty is strictly prohibited to be loaded into the original container.
3. Putty curing agent is a dangerous chemical. Putty should be stored in a cool place, away from heat source, sunlight, overstock and collision.
4. During use, storage and transportation, it is required to comply with the relevant national safety regulations. To avoid contact between skin and eyes or inhalation of vapor, it is better to wear safety goggles and protective gloves.
5. The effective storage period of general putty is six months from the date of production, with a special period of three years.
QuanZhou Neweco High Polymer Material Co.,Ltd.
Neweco is one of the leading unsaturated polyester resin manufacturers and suppliers,widely used in automobiles, ships, rail transit, wind power generation, pipe cans, heat and corrosion protection, building materials, stone repair, sanitary ware, artificial stone and other industries. Suitable for hand lay-up, spray, pultrusion, winding, molding, vacuum introduction / RTM, casting and other molding processes. Neweco Resin is committed to excellence and focuses on the application of composite materials to provide customers with comprehensive solutions.
Email:neweco01@up-resin.com
TEL: 86-18960460100