Home > News > Content

Chemical Resistance Of Cured Film Of Light-transmitting Resin

Jun 09, 2020

Article Summary: Alkali Resistance: In order to detect alkali resistance, the cured film of the light-transmitting resin is infiltrated into 1.0N hydrochloric acid solution, and it is concluded that all the test products mainly show good alkali resistance.

  Alkali resistance: In order to detect the alkali resistance, the cured film of the light-transmitting resin was infiltrated into the 1.0N hydrochloric acid solution, and it was concluded that all the samples mainly showed good alkali resistance.


   Acid resistance: Infiltrate the cured film of the light-transmitting resin into a 1.0N caustic soda solution to display the information Acid resistance. Observe that the sample with a higher proportion of siloxane is found to be very good.


   Abrasion resistance: The cured films of all light-transmitting resins mainly show good pure water resistance when exposed to distilled water.


   Washing resistance: When the cured films of all light-transmitting resins are exposed to non-polar solvents such as xylene and mineral banana water, they all show very good washing resistance. Because of its optically active organic solvent, its tolerance is good. The test specimens with high water content of silicone materials mainly show stronger characteristics than the water content of low silicone materials

Source:http://www.up-resin.com/

Back