Home > News > Content

How To Clean The Epoxy Mixing Container?

Nov 12, 2020

1. When scrubbing the mixing container, wear gloves and wipe off the excess resin on the sides and bottom of the mixing container with a paper towel. When the amount of resin in the mixing container is low, pour a little alcohol or acetone on the paper towel to easily wipe off the surface of the container. Of resin. Pay attention to put the soiled tissues in the trash can to avoid secondary pollution!

2. Soak it in acetone or alcohol and clean it with solvent.

3. The surface of parchment paper, wax paper, silicone pad, etc. has poor adhesion to epoxy resin. Turn the mixing container with excess resin upside down on the surface of parchment paper, wax paper, silicone pad, etc. to make the excess resin flow out. After the liquid is cured, the resin It is easy to peel from the container wall, just take the cured resin out of the plastic mixing container.

Note: The mixed epoxy A/B glue should not be poured into the sink and drain pipe to prevent it from solidifying in the sink or drain pipe and blocking the drain pipe.


The epoxy resin hardens after curing, and it will be difficult to clean, but there are ways. The epoxy resin can be heated to clean it.

Source:https://www.up-resin.com/

Back