Home > News > Content

Mixing Application Of Quartz Stone Resin

Jun 09, 2020

Article Summary: Shake the resin box vigorously for one minute. If the ink cartridge is not used for several days, the fixed filler will block the bite valve; ensure that the vent cover is closed, and then gently push through the valve Pre-existing gaps to eliminate openings.

  Because of its higher filler moisture content, quartz stone requires a lot of support points than other resins without firing.


   The default setting is suitable for setting. Generally, it is suitable for small and medium-sized targets. Large blocks will require large support point contact points and high relative density of support points, especially for parts with thicker sections. A small goal will be effective with smaller or fewer points of application.


  When quartz stone resin is stored in the ink cartridge or water storage tank, it will separate out and the foundation settles with the passage of time; before each application, the resin will infiltrate into the resin tank and the ink cartridge.


Shake the resin cartridge vigorously for one minute. If the ink cartridge has not been used for a few days, the fixed filler will block the bite valve; ensure that the vent cover is closed, and then gently push through the valve. To eliminate gaps. Insufficient mixing of resin in the ink cartridge will cause inconsistent water content of quartz stone in the resin, which may lead to inconsistent shrinkage during application

Source:http://www.up-resin.com/

Back