Home > News > Content

Points For Attention In The Construction Of Epoxy Resin

Jul 04, 2020

How much do you know about epoxy resin? It is actually a material used in some special requirements of the project. With the continuous development of the economy, more and more people choose to install the material, how much do you know about it? Is it not clear? Next, following the epoxy resin manufacturer Kangyu New Materials will be introduced below for everyone, I hope to help you.


1. Surface construction


(1) Scraping surface layer


After cleaning, clean up the unevenness, level it up, and then evenly coat the top coat on the middle coat surface.


Epoxy resin


(2) Rolling surface layer


After the scraped surface layer is turned back, use a roller brush to evenly coat the topcoat material on the scraped surface layer to make the epoxy surface bright and clean (pay attention to the roll roller printing).


2. Foundation surface treatment


Epoxy resin manufacturers recommend cleaning and polishing floating dust, oil stains and paint on the surface of the foundation, and ordinary oily particles.


3. Primer construction


On a clean surface, use trowel or roller to evenly apply the primer to the foundation (use trowel or roller depending on the foundation).


4. Medium coating construction


(1) Make up cracks and expansion joints, and there are some special irregularities.


(2) Use a trowel to scrape the intermediate coating mix evenly on the primer layer to increase its flatness and thickness.


Epoxy resin


(3) Polishing treatment


In addition to careful, responsible and fast construction, when sanding. Moreover, it is also necessary to be able to find problems in the construction in time and correct them in time.


5. Cleaning and vacuuming


In this process, the corners should be in place to ensure that the surface of the construction site is clean and free of particulate waste.

Source:https://www.up-resin.com/

Back