RTM/Vacuum Leading Resin - Resin transfer molding(RTM) Leading Resin 9502P
● Resin transfer molding process:
RTM(Resin Transfer Molding) process is a form of composite liquid molding in which resin is mixed with a catalyst or hardener before being injected into a closed mold filled with reinforcing fibers.
● Performance and Application:
9502P low peak temperature,small shringage,high strength,fast post curing,water proof and heat resisting. Apply to small RTM or vacuum infusion product,such as FRP air conditioner,helmet,etc.
Code
Type
Viscosity
Pa.s
Gel Time
Mins
Tensile Strength
Mpa
Tensile Modulus
Mpa
Elongation at Break
%
Flexural Strength
Mpa
Flexural Modulus
Mpa
Heat Deflection Temperature
℃
Barcol Hardness
9502P
orthophthalic tpye
0.12-0.17
20-25
70
3500
2.5
120
3600
80
42
Executive Standard: GB/T8237-2005
● Notice:
1.The above index of resin is accordance with GB/T8237-2005 and JC/T1092-2008 stander, base on Neweco professional technical research and users experiences.Neweco reserve the right to modify its main parameters.
2.Unsaturated polyester resin is class 3 flammable, transfer and storage must comply with the relevant provisions of the State,prohibited exposure and rain.
3.UPR is unstable,store in a cool, ventilated warehouse.Keep away from fire and heat sources.The temperature should not exceed 30℃.The packaging requires a seal and must not come into contact with air.
